Häfele KV Kitchen Appliance Lift Mechanism – Gas-Assisted, 30 lb Capacity

Make better use of your kitchen cabinet space with the Häfele KV Appliance Lift Hardware Mechanism. Designed for convenient storage of stand mixers and other countertop appliances, this cabinet-mounted lift brings your appliance up to working height when needed and stores it neatly inside the cabinet when not in use.

The gas-cylinder-assisted mechanism helps raise the appliance smoothly and locks securely in the raised position. A controlled soft-down function helps prevent the platform and appliance from dropping abruptly into the cabinet.

Manufactured by Knape & Vogt (KV) and distributed through Häfele, this durable steel lift mechanism offers two adjustable working-height positions and can be paired with a pre-made maple platform or a properly constructed custom platform.

Key Features

• Gas-cylinder-assisted lifting: Helps raise stored kitchen appliances to countertop level with less effort.
• Secure locking position: Holds the lift in its raised working position.
• Controlled soft-down function: Helps prevent abrupt lowering and protects the cabinet interior.
• Two-position adjustment: Configure the raised platform approximately flush with the countertop or in a lower position.
• Durable steel construction: Platinum-finish mechanism designed for cabinet installation.
• Flexible platform options: Compatible with optional Häfele maple platforms or a properly constructed custom platform.
• Space-saving design: Keeps frequently used appliances accessible while freeing up valuable countertop space.

Technical Specifications

Cabinet Measurements & Installation Requirements

Before purchasing, measure the inside of your cabinet carefully.

• Cabinet height: Allow at least 23-61/64" (608 mm) of internal cabinet height.
• Cabinet width: Allow the width of your selected platform plus 2-1/2" (64 mm) for the lift mechanism.
• Cabinet depth: Maximum platform depth is 13" (330 mm), or the depth of your selected platform if smaller.
• Mounting location: Install approximately 1/2" below and 1/2" behind the upper face-frame edge, following the manufacturer's installation instructions.
• Face-frame cabinets: Additional wood support blocking behind the face frame may be necessary to provide secure mounting.

The mechanism provides two raised-position adjustments. Depending on the selected platform and installation configuration, the working surface can be positioned approximately flush with the countertop or about 2" to 2-3/8" below it.

What's Included

• 1 Left appliance lift mechanism arm
• 1 Right appliance lift mechanism arm
• Manufacturer mounting hardware (22 #8 x 1/2" Phillips truss-head screws, as specified in the installation instructions)
• Manufacturer installation instructions

Important: The maple platform, custom platform, and accessory basket are not included with this mechanism. A separate platform must be securely attached to the lift arms before placing an appliance on the system.

Recommended Platform Options

The lift can be paired with a Häfele solid maple platform or an appropriately constructed custom platform. Shop the matching platform: Häfele Solid Maple Butcher Block Mixer Lift Platform

• KitchenAid and other compatible stand mixers
• Food processors
• Countertop kitchen appliances
• Kitchen baking and food preparation stations
• Custom kitchen cabinetry and appliance storage installations

Always verify the appliance dimensions and total supported load before installation. The maximum rated load is 30 lb (13 kg). Do not exceed this rating.

Frequently Asked Questions

Does this product include the maple platform?

No. This listing is for the appliance lift hardware mechanism only. The maple platform is sold separately and can be selected from the matching Häfele platform options.

Can I use this lift for a KitchenAid stand mixer?

Yes, provided the particular mixer and platform combination meets the 30 lb maximum load rating and fits within the cabinet and platform dimensions.

Does this lift have soft-close operation?

It features gas-cylinder lifting assistance and a controlled soft-down function. The manufacturer describes the lowering function as soft-down, rather than a conventional drawer-style soft-close mechanism.

How much weight can the lift support?

The maximum rated load is 30 lb (13 kg). Do not confuse this with 60 lb-rated appliance lifts.

How much cabinet space is required?

Allow at least 23-61/64" of internal cabinet height, a cabinet width equal to the platform width plus 2-1/2", and a maximum platform depth of 13".

Can I use my own platform?

Yes. A properly constructed custom platform can be attached to the lift arms using the manufacturer's installation instructions. Ensure that the platform is securely fastened and that the total load remains within the rated capacity.

Can the lift be adjusted to different working heights?

Yes. Two adjustment positions are available to accommodate different countertop and cabinet configurations.